Mediacom Digital Adapter Einstellungsanleitung PDF herunterladen (Seite 9)

16

17

Step 6

Turn on your TV. On the remote

control, press and hold the SETUP

button until the indicator LED

changes from red to green,

then press the “A” button.

Step 7

Press the CH^ (channel up) button

several times until the TV turns off.

After the TV turns off, press the

SETUP button. The indicator LED will

blink twice in green when the TV code

is successfully stored.

Step 8

Point the new remote control at the

TV. Press the POWER button on the

remote to turn on your TV. If the TV

responds (turns on), then you have

successfully programmed your remote.

The setup of the remote is now

complete. If you are not successful the

ﬁrst time, try again.

When the remote control is

programmed to operate the TV, there

are 5 keys that control the TV:

TV POWER, INPUT, VOLUME +,

VOLUME -, MUTE

Two Remotes

If you were unable to program your

remote, you will need to use two

remotes to operate your TV: the

Digital Adapter remote and the one

that came with your TV.

Setting The Remote Volume

• Use the remote control that

came with your TV to adjust

the volume to a comfortable

level. This should be the last

time you’ll use this remote for

volume control.

• Going forward use only your

Digital Adapter remote to

adjust volume up or down.

Note: Don’t use your TV remote to

change channels. Your TV must always

be set to the proper Input, HDMI, and

Ch 3 or Ch 4 or you will see a snowy

or blank screen.

Changes from

red to green

Blinks twice

in green

when the

TV code is

successfully

stored

Press and hold until the indicator

LED changes from red to green

Press several

times until the

TV turns off

Press after TV

has turned off

Press after

green light

Keys to Success

• Pay attention to the red and green

LED Indicator after each step.

• Take your time when pressing

the “CH^” button. If you hit

“CH^” one too many times

after your TV turns off, you’ll

need to start the process over.

• You must press the SETUP

button within ﬁve seconds of

the TV turning off to lock in

the code.

• Be patient. You may have to

press “Ch^” many times.

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare