Mediacom Digital Adapter Einstellungsanleitung PDF herunterladen (Seite 6)

Plug the other end into a working electrical outlet or power strip.

Make sure that the outlet is not controlled by a

switch that turns it on and off.

Check the front of the Digital Adapter to see if the green light

is on and blinking. If it is not on, check to make sure the power

cord is plugged into the power input “+5V DC In” and that the

other end is plugged into a working electrical outlet.

Note: After activation, the power light will remain on and constantly lit.

Please wait 20 minutes before calling to activate.

This will allow the Digital Adapter to connect to the network

and retrieve the latest updates.

Plug the other end into a working electrical outlet or power strip.

Make sure that the outlet is not controlled by a

switch that gets turned on and o.

Check the front of the Digital Adapter to see if the green light is on and

blinking.

If it is not on, check to make sure the power plug was plugged

into the power input “+

5V DC In” and that the other end

is plugged into a working electrical outlet.

Note: After activation, this light will remain on and constantly lit.

Please wait 20 minutes before calling to activate.

This will allow the Digital Adapter to connect to

the network and get the latest updates.

3698674A final4 11 10/5/11 4:38 PM

Power Up

If you are connecting the Digital Adapter to a television with HDMI, set your TV

to choose “HDMI” as the input source.

Pick which output channel your TV will use (Ch 3 or Ch 4) and set the switch on

the back of the Digital Adapter to the proper output channel you selected.

Find the power cord included in the kit. Plug the end of the power cord into the

power input “+5V DC In” on the back of the Digital Adapter.

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Mediacom Digital Adapter Einstellungsanleitung Seite 6